XM158 V1.0-NR
10
Select Programs
Auto Pro Part 1
Auto Pro Part 2
Auto Pro Part 3
Program 1 ~ 10 Program 1
Program 1 ~ 10 Program 2
Program 1 ~ 10 Program 3
Select programs to be run
Edit Program
Program 1
:
Program 10
Program Test
Step 01=SCxxx
Step 64=SCxxx
(“STEP XX”)
Testing program
Program in loop
Save and exit
Edit Scenes
Edit Scene 001
~ Edit Scene 250
Pan,Tilt,……
--Secne Time--
Input By Outside
Pan=xxx……
TIME=xx.xs
Save and automatically
return
manual scenes edit
E
di
t P
ro
gr
am
Rec. Controller
XX~XX
Automat. scenes rec
Function Mode
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select
“Set DMX address”
via the encoder.
• Press the encoder, adjust the DMX address by turning the encoder.
• Press the encoder to confirm.
• Press the Mode/Esc-button in order return to the main menu.
Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display automatically shows the channel
with a value changing.
Slave setting
With this function, you can define the device as slave.
Auto Program
With this function, you can run the internal program. You can select the desired program under
“Select program”
.
You can set the number of steps under
“Edit program”
. You can edit the individual scenes under
“Edit scenes”
.
With this function, you can run the individual scenes either automatically, i.e. with the adjusted Step-Time.
Music control
With this function, you can run the internal program sound-controlled.
Information
Time information
Power on time
With this function, you can display the temporary running time of the device from the last power on. The display
shows “XXXX”, “XXXX” stands for the number of hours. The counter is resetted after turning the device off.
Total run time
With this function, you can display the running time of the device. The display shows “XXXX”, “XXXX” stands for
the number of hours.
Total lamp time
With this function, you can display the running time of the lamp. The display shows “XXXX”, “XXXX” stands for
the
number of hours.
Lamp off time
With this function, you can display the temporary running time of the lamp from the last lamp on. The display
Shows “XXXX”, “XXXX” stands for the number of hours. The counter is resetted after turning the lamp off.
Clear lamp time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you replace the
