XM158 V1.0-NR
14
Users mode set
In this menu, user can select different channels list by different sequence:
For example, after the user enter this manual, if select Auto Program = CH 15, means in this User’s mode, the
“Dimmer” is in Channel 11.
User mode
With this function, you can create user defined channel orders.
Preset User mode
With this function, you can adjust the rest user defined channel order.
Edit program
Select program
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal programs.
Auto scenes rec.
The moving head features an integrated DMX-recorder y which you can transmit the programmed scenes from your
DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the
scenes at your controller, they will automatically be transmitted to the moving head.
Excursion:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different Slave units,
which run 3 different programs. The Master unit sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned to. If e.g. a
Slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit.
If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”.
To start a Auto Program please proceed as follows:
1. Slave-Setting
･
Select “Function Mode” by turning the encoder.
･
Press the Enter button to confirm.
･
Select “Set to slave” by turning the encoder.
･
Press the Enter button to confirm.
･
Turn the encoder to select “Slave 1”, “Slave 2” or “Slave 3”.
･
Press the Enter button to confirm.
･
Press the Mode/Esc button in order to return to the main menu.
2. Automatic Program Run
･
Select “Function Mode” by turning the encoder.
･
Press the Enter button to confirm.
･
Select “Auto Program” by turning the encoder.
･
Press the Enter button to confirm.
