Terbly PT330W-R, Руководство пользователя

Страница: 30 / 40

PT330W-R User Manual XM1147-V1.0-NR
29
“
Basic Mode
“
Extended Mode
“
User Mode A
“
User Mode B
“
User Mode
C
”.
5 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu
.
10.7.2. Edit User Mode
With this function you can adjust the rest user defined channel order
.
1 Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
“
Users mode set
”
is displayed
.
Press <ENTER> the display will show
“
Users mode
set
”.
2 Press <Up/Down> the display will show
“
Edit User Mode
”.
3 Press< ENTER> the display will show
“
Edit User Mode
”.
4 The display show
“
Max Channel=XX Press <Up/Down> button then you can choose
“
PAN=CH01
”.
5 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu
.
10.8. EDIT PROGRAM
1 Tap <MODE/ESC> button access the main menu Tap the <Up/Down> button until
“
Edit grogram
”
is displayed
.
Press ENTER the display will show
“
Edit grogram
”.
2 The display show
“
Select programs Press <Up/Down> the display will show
“
Edit
Program
“
Edit Scenes
“
Rec
.
Controller
”.
3 Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu
.
Run the auto program A master fixture can output to three different program signals to
the slave fixture to operate
.
It means the host will send cyclically in the following orders
(The host will keep operating the program of Part 1) Then the slave fixture will make
the selectively receiving according to its own set
.
1 If the slave fixture chooses Run For Slave 1 from the menu of 1-3,then it will receive
the part 1’s automatic program from link
in the same way when the slave fixture
chooses Run For Slave 2 then it will receive the part 2’s automatic program from link
.
2
Enter the menu of 1-3 Function Mode---Set To Slave Here to set machine operate
which part of the program during the host-slave connection
3 Enter the menu of 1-4 1-5 Function Mode---Set To Master
4 Enter the menu of 8-1 Edit Program---Auto Program Part1
.
The host outputs three
groups driven program---Part1 Part2 Part3(Part1 program runs the same effect as the
host)
5 Enter the menu of 8-2 Edit Program---Edit Program
.
Edit the program’s connection
connect the scene in order
6 The editor of the scene there are as many as 250 scenario editors and every scene can
have a program connection of 10
.
Note:
Part 2 Part 3 repeat in accordance with the Part1’s repeat
.
For example When Part 1
uses Program 2 Part 2 uses Program 4 Part 3 uses Program 6 Assume Program 2
includes scene of 10 11 12 13 Program 4 includes scene of 8 9 10 Program 6
includes scene of 12 13 14 15 Then it will run as below
.
Example