Terbly PT330W-R, Руководство пользователя

Страница: 3 / 40

PT330W-R User Manual XM1147-V1.0-NR
2
1. SAFETY INSTRUCTIONS
1.1. IMPORTANT SAFETY WARNING
This device has left the factory in perfect condition
.
In order to maintain this condition and to
ensure safe operation it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual
.
In order to install operate and maintain the lighting fixture safely and correctly we suggest that
the installation and operation be carried out by qualified technicians and these instructions be
carefully followed
.
CAUTION!
HIGH VOLTAGE. RISK OF SEVERE OR FATAL ELECTRIC SHOCK
CAUTION!
ALWAYS DISCONNECT MAINS SUPPLY BEFORE REMOVING ANY FIXTURE
COVERS
CAUTION!
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE. SENSITIVE PERSONS
MAY SUFFER AN EPILEPTIC SHOCK
CAUTION!
NEVER TOUCH THE DEVICE DURING OPERATION! COVERS MAY BE HOT
Important:
Damage caused by the disregard of this user manual is not subject to warranty
.
The dealer
and manufacturer will not accept liability for any resulting defects or problems
.
If the device has been exposed to temperature changes due to environmental conditions
do not power on immediately
.
The resulting condensation could damage the device
.
Leave
the device powered off until it has reached room temperature
.
Ensure only professional technicians perform maintenance on the fixture
.
To maintain the
fixture’s IP65 rating it is important to tighten screws properly following maintenance
.
Ensure the sealing rubber covers of oower CON and XLR connectors are fitted properly
when the device is not in use
to avoid water ingress
.
This device falls under protection-class I
.
Therefore it is essential that the device be
earthed
.
If either lenses or display are damaged (damage may include cracks or gashes in the
material) they must be replaced
.
Electrical connections such as replacing the power plug must be performed by a
qualified person
.
Make sure that the available voltage is not higher than that which is stated at the end of
this manual
.
Make sure the power cord is never crushed or damaged by sharp edges
.
If this should be