Connecting the Modem
10
Terayon TA-102 and TA-202 MTA Modem Installation Guide
Connecting the MTA Modem to your PC
In order for your computer to communicate with your new modem and the Inter-
net, it must be equipped with a network interface. Today’s computers are typically
equipped with either a 10/100 Base-T Ethernet port or a Universal Serial Bus
(USB) port. The Model TA-102 or TA-202 MTA modem comes equipped with
RJ-45 Ethernet and USB connectors, allowing the modem to connect to either an
Ethernet port or a USB serial port. To connect your new MTA modem to your PC,
do the following:
1.
Before you begin connecting the modem to your PC, look in your computer
user manual or look at the back of your PC to see what kind of network inter-
face your PC is equipped with.
IMPORTANT: If you do not have a network interface installed
in your computer, you will need to purchase one
from a retailer or your local cable company, and
install it according to manufacturer instructions.
2.
If your PC is equipped with a 10/100 Base-T Ethernet card, proceed to “Con-
necting the 10/100 Base-T Ethernet Cable” on page 11. If your PC is equipped
with a USB Serial Port, proceed to “Connecting the USB Cable” on page 13.
