DE5a-Net OpenCL
www.terasic.com
March 29, 2017
27
Figure 3-9 Set SW3.4 to Left Position (User Image Page)
After flash programming is done successfully and SW3.4 is set to correct position, developers can
power off PC and DE5a-Net board, then turn it back on.
Test „aocl diagnose‟ Command
The diagnose utility in the Arria 10 DE5a-Net board reports device information and identifies issues.
The diagnose utility first verifies the installation of the kernel driver and returns the overall
information of all the devices installed in a host machine.
In the Linux terminal, type ”
aocl diagnose
” to
check if the initialization completed successfully. If
successful, the programming message displays “
DIAGNOSTIC_PASSED
” as shown in
Figure
3-10
.
Figure 3-10 “aocl diagnose” messages
