DE5a-Net OpenCL
www.terasic.com
March 29, 2017
26
Figure 3-7 Select Flash Page
After selecting the desired flash area, it will take about 20 minutes for flash programming.
Figure
3-8
is the screen shot when flash programming is done successfully.
Figure 3-8 „aocl flash aclde5a_net_e10 hello_world.aocx” successfully
To make sure correct image is used when FPGA boot, please make sure the dip switch SW3.4 on
DE5a-Net is located at correct location. If User Image area is selected, the dip switch SW3.4 on the
DE5a-Net should be move to
up
position as shown in
Figure 3-9
.
