4-7
(2) External output signals
Connect wires to the external output terminals as shown in the following diagram.
Note
The parameter P100 allows you to select an external relay output pattern from
5 options.
For details and the setting method, refer to “7.5 Parameter setting.”
External output terminals
(I/O terminal block on control board)
Fig. 4-3-2(b) Settings for standard models
(Parameter P100: “0”)
#1 op
erati
on
#2 op
erati
on
Power
#1 fail
ure
#2 fail
ure
Receiver
tank full
Dry-run preventi
on
Receiver tank low
Troubl
e
Power
