Limited warranties
1.
In the event of failure or breakage under proper use of the product during the warranty period, equipment
supplied by Teral Inc. shall be repaired or replaced free of charge within the scope of the relevant part,
provided that such failure or breakage is attributable to inadequacy of the design or workmanship of the
equipment.
2.
The warranty mentioned in the above clause shall be only the mechanical warranty of the defective part,
and shall not cover any expenses or other damage arising from the failure or breakage.
3.
In the event of the following failures and breakage, the costs of the repairs and consumables (i.e. parts
whose consumption or wear is expected at the beginning of purchase) shall be borne by the user.
(1) Failures and breakage attributable to equipment that was not delivered by Teral Inc.
(2) Failures and breakage after the expiration of the warranty period
(3) Failures and breakage caused by disasters or force majeure, such as fire, acts of God or earthquakes
(4) Failures and breakage resulting from repairs, disassembly or modifications made without the consent
of Teral Inc.
(5) Failures and breakage when parts other than those designated by Teral Inc. are used
(6) Failures and breakage caused by any use outside the specification limit of the equipment
4.
Teral Inc. shall not be liable for any damage caused by incorrect or reckless use of the water supply unit
even if such damage occurs within the warranty period. Cost and expenses incurred for sending engineer(s)
in such a case shall be borne by the user.
5.
If the cause of the failure is unclear, necessary actions shall be determined through mutual consultation.
6.
In order to improve performance, some parts and/or components of the product may be changed without
prior notice.
In addition, upon repairs of the product, Teral. may use recycled parts that conform to our quality standards
or may use substitutes that are functionally equivalent.
Purpose of this manual / Notice to users
1.
The purpose of this manual is to provide the user with detailed information necessary to operate, maintain
and inspect the water supply unit (or “the unit”) properly.
This manual does not cover work that requires highly specialized knowledge (disassembly, repairs, etc.). If
the unit needs to be repaired, be sure to contact Teral. or its relevant service company.
2.
This manual is intended for:
x
persons experienced in the operation of water supply units, or those who have been trained by such
experienced operators
x
qualified persons, such as licensed electrical engineers, for the content regarding electric wiring work
3.
This manual mainly covers standard products. If you have purchased a customized product, some part of
this manual may not be applicable to your unit. In such a case, refer to other documents such as the
delivery specifications to confirm the product specifications.
4.
The product specifications and information in this manual are subject to change without prior notice.
5.
In the illustrations of this manual, some part of the product is omitted or simplified to make it easy to
understand. Therefore, the illustrations may look different from the actual product you use.
