background image

© Teradek, LLC 2017. All rights reserved.

 3

BASIC CONFIGURATION

INSTALLING T-RAX

  1.  Connect 100-240v A/C power to the power input (6) on T-RAX via the enclosed IEC cable.    

           Connect a second cable if your device includes a redundant power supply (7).

  2.  Connect an Ethernet cable between the 10/100/1000 Ethernet port (x) and a network switch.

  3.  Connect SD/HD-SDI video sources to any input BNCs corresponding to installed  

        encoder cards.

  4.  Connect SD/HD-SDI outputs via BNC cable to your monitor/switcher/router.

CONNECT TO T-RAX

T-RAX can be configured using its built-in web interface. This is accessible over your network, or via 

the built-in Wi-Fi.

Ethernet Defaults

IP mode: DHCP, T-RAX will request an IP address from your network. View the IP address by pressing 

either the      or     button on T-RAX until the Network screen is displayed.

Bonjour: Bonjour is enabled by default, and can be used 

to find T-RAX without using the IP address. If your web 

browser supports Bonjour, T-RAX will appear as a 

Webpage with the default-friendly name T-RAX xxxxx 

Administrative Console where xxxxx is the last 5 digits 

of the controller card’s serial number.

Login information

Once you’ve connected a computer or tablet to the same 

network as T-RAX, view the admin panel by opening a web 

browser and either selecting the Bonjour friendly name or 

navigating to the IP address. Theadmin page contains status 

information and configuration options for the T-RAX system 

and all of the connected cards. 

Stream information

T-RAX encoder cards are configured to stream 

via RTSP by default. When an active video  

signal is connected, you can preview the stream 

using an RTSP player (such as VLC) on your 

computer or mobile device. 

Note: 

Video streaming is only supported over the Ethernet interface. 

Username

admin

Password

admin

WI-FI DEFAULTS

ESSID

Teranet-0

Security Mode

WPA2 Personal

Password

terawifi

IP Address

172.16.116.1

Subnet Mask

255.255.255.0

RTSP STREAMING DEFAULTS

URL*

rtsp://ip.address:port/stream1

IP Address

T-RAX’s Ethernet IP address

Port

255x 

(x represents T-RAX card slot)

 

Содержание T-RAX













Отзывы: