ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
95
Support of factory-reset via web-page
Rename variables of 'video locked' status; Variables are now 'locked/unlocked'
Video Details button added at the web-page: Lists details of the video input.
Audio Details button added at the web-page: List details of the audio input.
VideoLoss Feature added at the webpage: <GREY, BLACK, OFF, COLORBAR>
Version 1.05_w14
–
2011-09-16 11:18
Reboot time is set to 90 sec.
Framerate Divider values modify to 1,2,3,4,5,6,7,8,10,12,15,25,30,50,60
Version 1.03_w12
–
2011-05-04 13:34
New supported video input formats at ENC-300-DVI: 1920x1080p @30/29.97/25 Hz
TTL is adjustable via webpage
Add adjustable audio input: MIC
Add adjustable LineIn Gain from -12dB - +59.5dB
Add adjustable MicIn Gain from -12dB - +59.5dB
Version 0.9.105_w07
–
2011-05-04 13:34
join own multicast enabled for VBR streaming mode
Diag-LED supported
Audio support; configuration via telnet: /configuration/encoder/0/audio/input <SDI, LINE>
Stream
mode
support
of
TS/Video
and
TS/Audio;
configuation
via
telnet:
/configuration/encoder/0/stream_mode <TS, TS/VIDEO, TS/AUDIO>
Version 0.9.104_w07
–
Internal Version
Version 0.9.103_w07
–
2011-03-22 14:10
Firmware version name was renamed
New multiplexer mode is used
Version 0.9.102jlo7
–
2011-02-18 16:54
Unicast and Multicast streaming is supported
Transmission of H.264 SD/HD (MPEG-4 part 10) streams is possible
Simple firmware updating via web interface
Network settings are adjustable
Support of the Factory-Reset feature via jumper