ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
48
3.4.19 Menu: System / Settings
The menu ‘System/Settings’ displays information about the installed firmware version and additionally
unlocked features.
Furthermore the system uptime, the MAC address and the used link mode is shown in the
‘System/Settings’ menu. See Figure 34
Figure 34: System/Settings page of the ENC-
300™
You can perform a factory reset by clicking the
‘FACTORY RESET’
button, with the following options:
Factory reset,
without
network settings: click the
‘Reset without Network Settings’
button in
the ‘Factory Reset?’ dialogue window.
Factory reset,
including
network settings: click the
‘Full Reset’
button in
the ‘Factory Reset?’
dialogue window.
You can reboot the device (without powering off) by clicking the
‘REBOOT’
button.
Permission:
Description:
KLV:
Allows the insertion of meta data in the transport stream. If this
permission is allowed, the ‘ENCODER / KLV’ page is visible on
your ENC-300 webpages.
HD/SD:
Allows in the ENC-300 a HD and SD encoded video output when
the video input has a HD resolution. Allows in the ENC-300 a SD
encoded video output when the video input has a SD resolution.
SD:
Allows in the ENC-300 only a SD encoded video output when the
video input has a HD or SD resolution.
Forward Error Correction:
Allows the usage of the Forward Error Correction (FEC) feature.
The FEC feature is an additional option which has to be purchased
separately. See also chapter 4.4 on page 72.
RTMP/RTSP
Allows using the RTMP/RTSP protocols. This feature is an
additional option which has to be purchased separately.
Table 26: Description of the permissions of additionally features in the ENC-
300™