ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
92
RTMP/RTSP added
Encoder/Destination RTMP/RTSP RTMP PUSH URL changed.
Encoder/Destination RTMP/RTSP text info tooltips changed.
It keeps the password after update
info box content can copyable
Version 3.01_w64
–
2013-05-28
RTMP/RTSP enabled
Inserter overlay set fixed
Inserter check after update fixed
Web: RTMP/RTSP protocol added at Encoder/Video stream_mode
Web: RTMP/RTSP protocol added at Encoder/Destination stream_mode
Web: RTMP/RTSP Licence file upload
It keeps the password after update
RTMP/RTSP Licence file upload
Version 2.13_w58
– 2013-04-30 16:08
Switched to Linux Kernel V 3.3
Keep negative gain values for MIC and Line audio input when video is lost.
Fix problems with hanging encoder when reconfiguring or changing input, observed with
1080p60 mode and downscaling to 720p or chroma_downfiltering.
round down AAC Audio Bitrate to next lower valid value
disable downscaling from 1024x768 to 720p (would be upscaling in horizontal direction)
the Firmware Update page reached the reminded 2 sec the Image insert checked again
Version 2.12_w58
–
2013-04-02 16:33
ENCODER/VIDEO: Enable downscaling for all resolutions
ENCODER/VIDEO: Add support for 'Chroma downfilter' when not downscaling.
For downscaling and chroma downfiltering frate_divider may need to be set to an appropriate
value > 1, depending on input resolution and cpu usage caused by other options like padding,
video_bitrate or talkback
add support for deinterlacing 576i50 -> 576p25 and 480i60 -> 480p30
set default vbvbuffer_size to 1000 ms
change some error messages and snmp info texts
add multicast route needed when no gateway is specified
Fix: enable snmp 'encoderInputLocked' value
Version includes updated SNMP-MIBs
Fix problem with 720p60 mode, chroma downfiltering and 0 % idle. Chroma-Downfilter is
sometimes too slow with special input scenes. There was a bug in handling this condition.
Web: Network/SNMP Manager IP setting fixed
Update page load clears the cpio files from the tmp. This fixed the ie 10 update problem
After update when the Firmware Update page reached the reminded 2 sec the Image insert
checked again
Version 2.11_w56
–
2013-01-11 18:09
Fix COMPORT passthrough support
EDID menu point added. if you login at the /log page
Info icons added
ENCODER/AUDIO: Talkback Rate 24000, 12000, 8000, 6000 added
ENCODER/VIDEO: Aspect Ratio 5:4, 16:10 added
ENCODER/VIDEO: 'Scene change detection' option (disable_future_frame) added
ENCODER/VIDEO: Down Convert show fixed
SYSTEM/PASSWORD: change fixed
ENCODER/SETTINGS: TS Rate renamed to VBR TS Rate (off or lowdelay case) or CBR TS
Rate (on case)
ENCODER/DESTINATION: New protocol added RTP, RTP/FEC
When 'RTP/FEC' is selected:
FEC options added
o
FEC Dimension
o
FEC Rows
o
FEC Columns
o
FEC Traffic Shaping