38
Setting up the agent
Click on Tools > Options and choose “Agents”
Click on “Add” and the following window will open to add an SNMP device
Type in the IP-address of the SNMP device. In this case the IP-
address of the ENC-100
Leave the Port to 161, or change if it is set to another one.
Type in the “Read Community” password. The default
password of the ENC-100 is “public”
Type in the “Write Community” password. The default
password of the ENC-100 is “private”
Set the SNMP Version to 2
Choose the loaded Teracue ENC-100 MIB and right click
on it. Click on “Expand subtree” to see all options of the
ENC-100.
