Teracue DEC- Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 68

Teracue DEC- Скачать руководство пользователя страница 32

DEC-300

™ H.264 and MPEG-2 SD/HD Decoder

User Guide V1.3

32

3.4.8

Menu: Network / Settings

Figure 15

shows the ‘Network / Settings’ page of the DEC-300™ decoder. Here you are able to set the

decoder's own IP-address, subnet mask, gateway address and define the decoder's host name.

Figure 15: 'Network / Settings' page of the DEC-3

00™ decoder

Table 13

describes the ‘Network / Settings’ page of the DEC-300™.

Settings:

Description:

Link Mode:

Specifies the network port characteristics of the DEC-3

00™. This

option has been added especially to address specialized network
and/or administration requirements.

.!.

In most cases it is sufficient (and recommended) to

leave this setting on ‘AUTO’, so the DEC-300™ and

the connected switch can deal out the preferred

connection on their own.

DHCP:

Enables / Disables DHCP. Only use this option if you are familiar
with DCHP and your network supports DCHP.

Host Name:

Specifies the hostname of the DEC-3

00™. Please enter your

desired hostname of the DEC-3

00™.

IP Address:

Specifies the IP-address of the DEC-3

00™. The IP-address is an

identifier  for  your  DEC  in  the  TCP/IP  network.  Networks  use  the
TCP/IP protocol route messages based  on the IP-address of the
destination.  The  format  of  an  IP-address  is  a  32-bit  numeric
address  written  as  four  numbers  separated  by  periods.  Each
number can range from 0 to 255. E.g.: 172.16.20.200

Subnet Mask:

Specifies the subnet mask of the DEC-3

00™. A subnet mask is a

32-bitmask used to divide an IP-address into subnet and specify
the networks available hosts. E.g.: 255.255.0.0 is the net mask
for a class-B IP-address like 172.16.20.200.

Broadcast Address:

Displays the broadcast IP-address. (Read only field)

Gateway Address:

Specifies the IP-address of your gateway. The gateway is
commonly the address of the network device such as a network
router.

Table 13: Description of the 'NETWORK/SETTINGS' webpage of the DEC-3

00™

«
...
30
31
32
33
34
...
»

Содержание DEC-





































































Отзывы:

Нет отзывов