Teracue DEC- Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 68

Teracue DEC- Скачать руководство пользователя страница 19

DEC-300

™ H.264 and MPEG-2 SD/HD Decoder

User Guide V1.3

19

3.3.2

‘APPLY’ and ‘SAVE’ Buttons

A change or multiple changes of the configuration settings will only take effect
after the

‘> APPLY’ button is pressed.

The decoder will then start working with the new parameters, but the parameters
will not be saved to the decoder. Applied settings are not saved and will be lost
after a reboot.

Good for quickly testing and applying different settings.

Same as the

‘> APPLY’ button,

but

the configuration parameters will be applied

and saved to the decoders flash memory.
Saved parameters will be used by the decoder even when the decoder is turned
off & on or after a reboot has taken place.

Good for permanently saving the decoder configuration.

3.3.3

Blue Info-Box

The blue Info-Box shows read-only state information for the user, see Figure 6. Table 5 contains the
description of the blue Info-Box.

Figure 6: Blue Info-Box of the DEC-300 webpages

Information:

Description:

Codec:

Shows the video codec of the input stream.

Encoder Status:

Shows whether the decoder is decoding or not.

Uptime:

Shows how long the decoder runs.

Stream Locked:

Shows whether the input stream is locked or not.

Transport Rate:

Shows the transport rate of the input stream.

Stream mode:

Shows the stream mode of the input stream

Video bitrate:

Shows the video bitrate of the input stream.

Video resolution:

Shows the video resolution of the input stream.

Video framerate:

Shows the video frame rate of the input stream.

Source:

Shows the specified source IP-address and port number.

Received Bytes:

Shows the bytes which the decoder has received.

Video Continuity Errors:

Shows the values of occurred video continuity errors.

Audio Continuity Errors:

Shows the values of occurred audio continuity errors.

Table 5: Description of the blue Info-Box of DEC-300 webpages

You  can  minimize  the  blue  Info-Box  by  clicking  at  the  blue  Info-Box.  Furthermore,  the  blue
Info-Box  minimizes  itself  automatically  after  five  minutes.  To  maximize  the  blue  Info-Box,
please  click  at  the  arrow  which  is  shown  at  the  minimized  Info-Box.  The  arrow  is  shown  at
the left of this text break.

«
...
17
18
19
20
21
...
»

Содержание DEC-





































































Отзывы:

Нет отзывов