Teracue DEC- Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 68

Teracue DEC- Скачать руководство пользователя страница 29

DEC-300

™ H.264 and MPEG-2 SD/HD Decoder

User Guide V1.3

29

3.4.6

Menu: Decoder / GPIO

The General Purpose Input/Output (GPIO) supports a GPI function for the pass-through mode to
control devices which are connected with another DEC-300

™ decoder or ENC-300™ encoder.

Furthermore it supports a GPO function for the manual mode to send a signal to a device which is
directly connected to the decoder via the GPIO D-

Sub connector of the breakout cable ‘P’. This allows

users to connect a special device, e.g. sensor to the GPIO Port and send from the decoder a signal to
control the special device.

Figure 13: 'Decoder / GPIO' page of the DEC-3

00™ decoder

Settings:

Description:

Mode:

Specifies the GPIO mode.

‘Manual’

switches the local GPO value

to the level high (=1) or low (=0). The high or low level must be
entered in the ‘GPO-Value’ field.

‘Passthrough/A’

and

‘Passthrough/B’

forward the high (=1) or low (=0) level via UDP

to  another  encoder  or  decoder  at  which  a  device  is  connected.
Therefor the IP-address of the destination encoder/decoder must
be  entered  in  the  ‘Destination’  field.  The  difference  between
‘Passthrough/A’  and  ‘Passthrough/B’  is  that  the  GPO  value  of
‘Passthrough/B’ is inverted.  ‘Passthrough/A’ and  ‘Passthrough/B’
has the following states:

Passthrough

Parameter:

DEC-300

GPI:

ENC-300

GPO:

Passthrough/A

1

1

0

0

Passthrough/B

1

0

0

1

GPO-Value:

Specifies the GPO hig

h or low level. ‘0’ indicates the low level

and ‘1’ indicates the high level. This field is only in use, when the
mode is set to ‘Manual’.

Destination:

Specifies the IP-address of the destination encoder/decoder to
which the connection shall be created. This field is only in use,
when the mode is set to ‘Passthrough/A’ or ‘Passthrough/B’.

GPI-Value:

Shows the high/low level which the decoder gets. Read-only field.

Table 11: Description of the 'DECODER/GPIO' webpage of the DEC-300

™

«
...
27
28
29
30
31
...
»

Содержание DEC-





































































Отзывы:

Нет отзывов