Teracom TCW181B-CM, Руководство пользователя

Страница: 12 / 13

TCW181B-CM_R1 Page 12
15. Factory default settings
TCW181B-CM can be restored to its original factory default settings, following the steps
below:

Turn off the power supply;

Press and hold the RESET button then turn on the power supply;

The LED’s STS and LOG will flash 14 times, after that they will turn on. In this moment the
RESET button should be released.
The factory default settings are:
User Name (Admin) admin
Password (Admin) admin
IP Address 192.168.1.2
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
SNMPConfiguration disabled
readCommunity public
writeCommunity private
16. Firmware update
TCW181B-CM supports remote firmware update. To update the device follow the steps below:
- Download the TCW1XX_Update_Tool program from www.teracom.cc ;
- Download the latest firmware version file (*.cod) from www.teracom.cc ;
- Start the program and update the firmware.
Attention! Don’t turn off the power supply during the update. Turning off the power supply will
damage the device.
Rev. 1 – September 2012