Teracom TCW181B-CM, Руководство пользователя

Страница: 9 / 13

TCW181B-CM_R1 Page 9
12. Remote control application example
The controlled device is connected in series with the relay contacts. User can operate
TCW181B-CM using either WEB browser or SNMP application. The relays can be managed
independently of each other.
The above example is included solely for illustrative purposes. Because of the many variables
and requirements associated with any particular installation, Teracom Ltd. cannot assume
responsibility or liability for actual use based on the example.
13. Control and monitoring using SNMP
TCW181B-CM can be configured and monitored through SNMP (Simple Network
Management Protocol). This could be done using every SNMPv.1 compatible program.Parameters
that can be changed, are grouped according to their functions in the tables below. To obtain a valid
OID number it is necessary to replace the “x” symbol with the ”1.3.6.1.4.1.38783
” . To save the
changes configurationSaved (OID x .6.0) should be set to "1".
13.1 Product
OID Name Access Description Syntax
x .1.1.0 name read-only Device name String
x .1.2.0 version read-only Software version String
x .1.3.0 date read-only Release date String
13.2 SNMP Setup
OID Name Access Description Syntax
x .2.1.0 trapEnabled read-write TRAP messages enable/disable INTEGER { Yes(1), No(0) }
x .2.2.0 trapReceiverIPAddress read-write TRAP messages receiver address IpAddress
x .2.3.0 trapCommunity read-write TRAP community String (SIZE (0..13))