8.5
SNMP Setup page
TCW180
supports SNMP v.1 that enables
the device to be part of large monitoring and
control networks. The possible settings are:
•
SNMP Configuration –
enable SNMP v.1
•
Read-Write community –
performs client authentication
•
Read-Only community –
performs client authentication
SNMP trap messages are sent for the following conditions:
-
if event occurs on
Digital Input
(the signal changes its state)
-
device restart
The following parameters can be changed:
•
SNMP Traps –
enable SNMP trap messages
•
IP address –
IP address of the receiving host
•
Community string –
performs client authentication
•
Trap Interval -
time interval for SNMP trap messages
•
Max. number of Traps –
maximum number of SNMP trap messages sent, if trap
condition is present
