By pressing the key (A) Set-Up longer as 2 seconds the
„
set-up" function is starting.
At the display appears:
SET TIMER !
TIMER OFF
(On)
By pressing key (B)
„
Change
”
the timer is switches between off and on.
If pressing key (A)
„
Set-Up
“
, by TIMER OFF the timer is switched off and you can continued by point 3.1.
If you press the key by TIMER ON, you can now choose the measure time.
In the display appears :
NEW TIMER !
TIME = 001 s
By pressing key (B)
„
Change
“
it appears
T= 002s
and than in 1 second Steps up to10 Second.
After that the timer starts with
T=010s
the changing steps are now 10 Seconds up to 60 Seconds, after this
you get 60 second steps up to 240 seconds.
Press the (A)
„
Set-Up
“
key to choose the displayed timer time.
At the display appears:
TIMER MODE :
AVERAGE
(LAPSE)
By pressing key (B)
„
Change
”
the timer is switching between AVERAGE and LAPSE.
Press the (A)
„
Set-Up
“
key to choose the displayed timer mode.
Now, it is asked whether you will delete the EEPROM stored data files.
In the display appears:
DEL FILES ?
YES
(NO)
By pressing key (B)
„
Change
”
the display is switching between YES and NO.
By pressing the (A)
„
Set-Up
“
key if YES is displayed, all files in the EEPROM memory will be erased.
By pressing the (A)
„
Set-Up
“
key if NO is displayed, no file will be erased, and the next file is storage by the
next free file number.
In the 1st line at the display appears for approximately 2 seconds:
WAIT . . .
After that it appears in the 2nd line:
FILES DELETED !
3. SET-UP Function
4
