Description of product
LAP-TEQ Elevation
13
Notice
In the factory setting, the trigonometric correction is activated
and unit is set to “m” (metres). To deactivate the trigonometric
correction and/or to change the unit to “ft” (feet), refer to
“Trigonometric correction / length unit” on page 20 and follow
the instructions provided there.
A complete LAP-TEQ Elevation distance measuring system consists of an
elevation unit mounted on a magnetic mount and a connected display system
such as LAP-TEQ Display PLUS or LAP-TEQ Motion System.
The elevation unit is designed for mounting on a flying frame, for example, and
measures the vertical distance between the zero line on the unit (see Your
device at a glance on page 12 ) and the surface beneath. This provides
information on the height of the speaker element and/or of the entire array.
The laser beam of the elevation unit is used for visually checking the area of
the surface to which the measurement is made. This allows you to determine
whether the end point of the measurement is correct.
The magnetic mounting bracket can also be used to mount a LAP-TEQ Sensor
PLUS. It is then possible to simultaneously measure the height and the vertical
alignment. Both values are shown simultaneously on the display. Use of a
LAP-TEQ Motion System as the display unit allows simultaneous adjustment
of the height and alignment.
Содержание LAP-TEQ
Страница 1: ...Operating Manual...
Страница 29: ...Declaration of Conformity LAP TEQ Elevation 29 12 Declaration of Conformity...