TEQSAS LAP-TEQ, Руководство по эксплуатации

Страница: 17 / 30

First operation
LAP-TEQ Elevation 17
4.2 Connection of a LAP-TEQ Sensor PLUS (optional)
► Mount the LAP-TEQ Sensor PLUS (1) likewise on the flying frame of the
magnetic mounting bracket (see operating instructions for LAP-TEQ
PLUS).
► Connect the LAP-TEQ Sensor PLUS (1) to the “THRU” socket of the
elevation unit (3) by means of a standard 3-pin XLR cable (2).
Notice
The entire length of the cables (2) + (4) between the LAP-TEQ
Sensor PLUS, the elevation unit and the display unit must not
exceed 45 m.
For a distance greater than 45 m, you must use an XLR cable
with a larger cross section than 0.22 mm². This will reduce the
voltage drop along the cable route.