16
t
Assembly
Preparation
Danger Risk of injury!
Failure to follow these
instructions can lead to
problems and risks while using
the BBQ.
– Follow all of the assembly instructions
listed here.
1. First read through the assembly
instructions completely.
2. Allow yourself enough time for
assembly and find an even working
space of one to two square meters.
3. Small parts such as handles will
probably be preassembled.
4. Look out for sharp corners and wear
protective gloves for assembly.
Required tools
1 x Phillips screwdriver
1 x Adjustable spanner
Alternatively, instead of the spanner you
can also use pliers to fasten the nuts.
Assembling the BBQ
1. Unpack BBQ
Unpack the BBQ and dispose of
all packaging materials. Keep the
packaging materials out of the reach of
children and dispose of them according
to regulations after BBQ assembly.
Pay attention to the illustration of the
BBQ during assembly.
2. Fasten the support legs to the
housing
Fasten the two support legs
(4)
to both
sides of the housing
(2)
with the M5x30
screws
(B)
and M5 nuts
(c)
.
3. Fasten the handle
Fasten the handle
(1)
to the upper
part of the housing with the
M5x10 screws
(A)
.
4. Fasten the locking hook
Open the upper part of the housing as
far as is shown in the illustration of the
BBQ. Hook the locking hook
(3)
into
the holes in the housing
(2)
.
5. Insert the charcoal plate and place
the BBQ grate.
Place the charcoal plate
(6)
on the
bottom of the housing. Place the BBQ
grate
(5)
. Hook the BBQ grate handle
(7)
to the crossbar on the BBQ grate.
6. Fold out the BBQ
If a larger grilling surface is required,
the BBQ can be folded out so that
the upper part can be used as a
grilling surface. The handle serves as
a support leg. To fold out the BBQ,
remove the locking hook
(3)
.
Place the second charcoal plate
(6)
on
the bottom of the upper part that was
folded out, and place the second BBQ
grate
(5)
as well. Hook the second
BBQ grate handle
(7)
to the crossbar
on the BBQ grate.
The BBQ has been completely
assembled. Disassemble the BBQ in
the reverse order.
Important: All screws must be tightly
fastened.
P170052-TEPRO-1043-Billings-20170818_DE_GB.indb 16
18/8/2017 3:16 PM
