16
Every time the unit is switched on, the
programme 1 is automatically selected. If
you wish to change to programme 2
press and release the
ON/OFF
button.
Programme 2 selection will be indicated
by two short beeps.
To change back to programme 1, press
and release the
ON/OFF
button. A single
beep will indicate programme 1 has
been selected.
Every time a new programme is selected,
the strength level is reverted to zero. This
is a safety feature to alleviate any sudden
feeling of a surge, as each programme
gives a different sensation.
STRENGTH CONTROLS
The buttons marked
˄
,
˅
are the strength
controls.
To increase the intensity in steps of 0.5 mA
press and release the
˄
button. To
increase automatically, press and hold
the
˄
button (fast increase in steps of 0.5
mA). To decrease the intensity in steps of
0.5 mA press and release the
˅
button. To
decrease automatically, press and hold
the
˅
button (fast decrease in steps of 0.5
mA).
A short beep will be heard with each
press of the strength controls.
When using the strength controls,
reaching maximum or minimum intensity
will be indicated by three quick beeps.