BOOST
13
14
8. CONTROLS
The
mamaTENS
has four coloured buttons on the front and one on
the side.
The left curved GREEN BUTTON marked “ON/OFF” is
the ON and OFF Switch.
Press ON and hold for 2 seconds to turn ON. (This
delay avoids turning ON accidentally). The LCD display
will appear as “A01 00” indicating that the unit has
automatically set itself into Labour Programme A and mode
1 at zero intensity (00). Press OFF to turn the unit off.
The right curved GREEN BUTTON marked ▼ & ▲ is the
intensity control.
Each time the ▲ is pressed and then released, the
mamaTENS
will increase in intensity by one level. The
mamaTENS
has 50 levels of intensity in Programmes A
and B and 60 in Programme C.
Each time the ▼ is pressed, the intensity will decrease by
one level. Hold down the ▼ or ▲ button to scroll intensity.
As you increase the intensity you will experience a gentle
tingling feeling. You may feel little or no sensation from
the
mamaTENS
at its lower levels, but keep pressing and
releasing the green button until the sensation is strong
but comfortable. To maintain the effect as your body
becomes accustomed to the signal you will probably need
to steadily increase the stimulation by raising the intensity
one level at a time: this is perfectly normal.
SAFETY FEATURE
- If the pads or leads become disconnected,
the intensity will automatically reset to zero. If the
mamaTENS
is accidentally switched on it will switch off automatically if the
intensity is not pressed within 5 minutes.
NB
NOTE
mama tens instructions artwork.indd 18-19