Insert the battery
Replace the
battery cover
19
10. HOW TO ASSEMBLE YOUR UNIT
Your
Flexistim
has been designed to be simple and easy to use. Assembly of the
Flexistim
unit is very simple and requires only five steps.
STEP 1: BATTERY
Slide belt clip down to access battery cover.
Remove the battery cover and insert the
battery (as shown on the diagram) inside
the battery compartment. Replace the
battery cover.
NOTE:
Fully charge battery before initial use.
See “Charging the Battery” on page 48.
CAUTION:
There is a risk of explosion if the battery is fitted incorrectly. Replace only with the
correct 3.7 volt lithium battery. Do not dispose of the battery in a fire and keep it out of
reach of children. The battery must be removed from the unit if unit is not used for a
long period of time.
STEP 2: LEADS
If only using one lead, insert into one socket.
If using two leads, insert into both sockets.
A:
Insert the lead wires
B:
Turn the plug on the lead wire 90° to lock it
between the main body and handle of the unit.
This prevents accidental disconnection
during treatment.
STEP 4: PLACEMENT OF ELECTRODES
Ensure wherever you intend to place the electrodes, the skin is clean and thoroughly
dry. Remove the electrodes from the clear plastic shield and position on your body
as required.
20
STEP 3: ELECTRODES
Remove electrodes from the bag and connect to the leads.
flexistim instructions final.indd 22-23
27/11/2014 12:07