EN
TROUBLESHOOTING
PROBLEMS
CAUSES SOLUTIONS
The machine does not work
The batteries are disconnected
Connect the batteries to the machine
7KHEDWWHULHVDUHÀDW
Recharge the batteries
Blown fuse
Replace
Ignition key not engaged
Turn the key
Emergency button pressed
Release the emergency button
The brushes do not turn
The dirty water tank is full
Empty the dirty water tank
Blown fuse
Replace
7KHEDWWHULHVDUHÀDW
Recharge the batteries
Damaged motor
Replace
The machine does not clean uniformly
The brush or disks are worn
Replace
No solution comes out of the detergent tank
Damaged solenoid valve
Replace
Dirty solenoid valve
Check
Detergent solution tank empty
Top up
The hose delivering detergent to the brush is blocked
Unblock
7KHWDSXSVWUHDPRIWKH¿OWHULVFORVHG
Open the tap
Blown fuse
Replace
'HWHUJHQWÀRZGRHVQRWVWRS
Damaged solenoid valve
Replace
Dirty solenoid valve
Clean
The suction motor does not start
The dirty water tank is full
Empty the dirty water tank
Blown fuse
Replace
7KHEDWWHULHVDUHÀDW
Recharge the batteries
Damaged motor
Replace
The squeegee does not clean or has poor suction
7KHHGJHRIWKHUXEEHUEODGHVLQFRQWDFWZLWKWKHÀRRULVZRUQ
Replace the blades
Squeegee blocked or damaged
Check
7KH GLUW\ ZDWHU WDQN ÀRDW LV DFWLYDWHG RU LV EORFNHG E\ GLUW RU
is faulty
(PSW\WKHGLUW\ZDWHUWDQNFKHFNWKHÀRDW
Blockage in the suction hose
Check
The suction hose is not connected to the squeegee or is
damaged
Check
The machine does not move
7KHEDWWHULHVDUHÀDW
Recharge the batteries
Damaged motor
Replace
The machine does not brake
Electromagnetic brake clamp screws loose
Tighten the screws
Electromagnetic brake faulty
Replace
The batteries do not provide the normal working time
The battery poles and charging terminals are dirty and oxidised Clean and grease the poles and terminals, charge the batteries
The electrolyte has evaporated and is not covering the plates
completely
Top up all elements with distilled water so that all plates are
covered, then recharge the battery.
The battery charger does not work or is not suitable
Check
31
Содержание LPTB03308
Страница 8: ...EN X Y Z See TECHNICAL SPECIFICATIONS table MACHINE DIMENSIONS X Y Z 8 ...
Страница 35: ......