Tennant LPTB03308, Руководство оператора, Страница: 14 / 36

EN
- Lock the motor wheel brake by turning the two
screws anticlockwise.
-
5H¿W WKH GHWHUJHQW VROXWLRQ ¿OWHU FRYHU DQG WKH
VLGHÀDSV
- Remove the brushes from their packaging.
- Clean the outside of the machine, taking care to
observe safety regulations.
Once the machine is clear of the packaging, proceed to
install the batteries (refer to section “
Batteries: installation
and connection ”).
The various items of packaging can be kept, if so desired,
as these can be reused to protect the machine in the event
RI LW EHLQJ PRYHG WR D GLႇHUHQW VLWH RU VHQW WR D UHSDLU
workshop.
If not retained, the packaging must be disposed of in
compliance with current regulations.
Batteries
! ATTENTION: do not use NON-rechargeable batteries
7ZR GLႇHUHQW W\SHV RI EDWWHU\ PD\ EH LQVWDOOHG RQ WKHVH
machines:
Leak-proof tubular batteries (WET): the electrolyte level
must be checked regularly.
GEL or AGM batteries: this type of battery requires no
maintenance.
7KH WHFKQLFDO VSHFL¿FDWLRQV RI WKH EDWWHU\ PXVW
correspond to those listed in the section on the “ Technical
VSHFL¿FDWLRQV´
of the machine. The use of heavier
batteries could seriously jeopardize manoeuvrability and
lead to the drive motor overheating. Lighter batteries of
lower capacity, on the other hand, will need to be charged
more frequently.
! NOTICE
Enter the type of battery installed in the machine
software settings.
Follow the instructions below to adjust the machine logic
settings for the type of battery installed.
- Press the emergency stop button to turn the
PDFKLQHRႇ
- Press the two “+” and “-” buttons simultaneously,
then release the emergency stop button while
continuing to hold the “+” and “-” buttons, until the
EDWWHU\LGHQWL¿FDWLRQ³WLS$´³WLS*´DSSHDUVLQWKH
display.
-
3UHVVWKH³VROXWLRQÀRZVHOHFWLRQ´EXWWRQWRVHOHFW
the type of the batteries installed: “tipA” wet
batteries, “tipG” gel batteries.
- Press the emergency stop button to store the
parameter.
WET batteries, preparation:
! DANGER: The installation and connection/
removal of the batteries must be entrusted
to a TENNANT-approved service technician
(referred to hereinafter as skilled technician).
14