Tennant 8400D, Руководство оператора

Страница: 5 / 96

SAFETY PRECAUTIONS
3
8400D MM312 (2–94)
SAFETY PRECAUTIONS
The following precautions are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or
unsafe practices which could result in
severe personal injury or death.
FOR SAFETY: To identify actions which
must be followed for safe operation of
equipment.
The machine is suited to sweep disposable
debris. Do not use the machine other than
described in this Operator Manual. The machine
is not designed for use on public roads.
The following information signals potentially
dangerous conditions to the operator or
equipment:
FOR SAFETY:
1. Do not operate machine:
– Unless trained and authorized.
– Unless operator manual is read and
understood.
– If it is not in proper operating
condition.
– In flammable or explosive areas unless
designed for use in those areas.
– In areas with possible falling objects
unless equipped with overhead guard.
2. Before starting machine:
– Check for fuel, oil, and liquid leaks.
– Keep sparks and open flame away
from refueling area.
– Make sure all safety devices are in
place and operate properly.
– Check brakes and steering for proper
operation.
3. When starting machine:
– Keep foot on brake and directional
pedal in neutral.
4. When using machine:
– Use brakes to stop machine.
– Go slow on inclines and slippery
surfaces.
– Use care when reversing machine.
– Move machine with care when hopper
is raised.
– Make sure adequate clearance is
available before raising hopper.
– Do not carry passengers on machine.
– Always follow safety and traffic rules.
– Report machine damage or faulty
operation immediately.
5. Before leaving or servicing machine:
– Stop on level surface.
– Set parking brake.
– Turn off machine and remove key.
6. When servicing machine:
– Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
– Block machine tires before jacking
machine up.
– Jack machine up at designated
locations only. Block machine up with
jack stands.
– Use hoist or jack of adequate capacity
to lift machine.
– Wear eye and ear protection when
using pressurized air or water.
– Disconnect battery connections before
working on machine.
– Avoid contact with battery acid.
– Avoid contact with hot engine coolant.
– Allow engine to cool.
– Keep flames and sparks away from
fuel system service area. Keep area
well ventilated.
– Use cardboard to locate leaking
hydraulic fluid under pressure.
– Use Tennant supplied or approved
replacement parts.