ENGLISH
EN
5100 (02–01)
9
ADJUSTING CONTROL HANDLE HEIGHT
The control handle has three height settings to
accommodate a comfortable operating height.
1.
Locate two control handle height adjustments
knobs on handle (Figure 20).
2.
Pull both knobs and raise or lower handle, release
knobs to lock (Figure 20).
FIG. 20
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE–OPERATION CHECKS
S
Sweep and dust mop floor to remove particles and
other debris.
S
Check battery meter charge level to ensure
batteries are fully charged (See BATTERY
CHARGING).
S
Check condition of pad or brush.
S
Check condition of squeegee blades.
SCRUBBING WITH MACHINE
1.
Release brush lift pedal from transport position by
stepping down on scrub head release pedal
(Figure 21).
FIG. 21
2.
Lower squeegee assembly by moving squeegee
lift knob to the right (Figure 22).
FIG. 22
3.
Turn on key, vacuum and solution switches
(Figure 23).
FIG. 23
NOTE: The solution flow and brush will not start until
brush triggers are pulled.
