EN
ENGLISH
2
5100 (02–01)
This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions.
Read this manual completely and understand the
machine before operating or servicing.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
S
The machine is operated with reasonable care.
S
The machine is maintained regularly - per the
machine maintenance instructions provided.
S
The machine is maintained with manufacturer
supplied or equivalent parts.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No.-
Install. Date -
Serial No.-
E
2001 Tennant Company
TABLE OF CONTENTS
SAFETY PRECAUTIONS
3
. . . . . . . . . . . . . . . . . . . .
MACHINE COMPONENTS
4
. . . . . . . . . . . . . . . . . . .
CONTROL PANEL SYMBOLS
4
. . . . . . . . . . . . . . .
MACHINE INSTALLATION
5
. . . . . . . . . . . . . . . . . . .
UNCRATING MACHINE
5
. . . . . . . . . . . . . . . . . .
INSTALLING BATTERIES
5
. . . . . . . . . . . . . . . .
MACHINE SETUP
6
. . . . . . . . . . . . . . . . . . . . . . . . . .
ATTACHING SQUEEGEE ASSEMBLY
6
. . . . .
INSTALLING PAD DRIVER OR BRUSH
7
. . . .
REMOVING PAD DRIVER OR BRUSH
8
. . . . .
FILLING SOLUTION TANK
8
. . . . . . . . . . . . . . .
ADJUSTING CONTROL HANDLE HEIGHT
8
.
MACHINE OPERATION
9
. . . . . . . . . . . . . . . . . . . . .
PRE–OPERATION CHECKS
9
. . . . . . . . . . . . . .
SCRUBBING WITH MACHINE
9
. . . . . . . . . . . .
OPERATING EST MODEL
10
. . . . . . . . . . . . . . . .
WHILE OPERATING MACHINE
10
. . . . . . . . . . .
CIRCUIT BREAKERS
10
. . . . . . . . . . . . . . . . . . . .
MACHINE ADJUSTMENTS
11
. . . . . . . . . . . . . . . . . .
ADJUSTING SOLUTION FLOW
11
. . . . . . . . . . .
ADJUSTING PAD PRESSURE
11
. . . . . . . . . . . .
ADJUSTING SQUEEGEE LIFT CABLE
11
. . . .
DRAINING TANKS
11
. . . . . . . . . . . . . . . . . . . . . . . . . .
DRAINING RECOVERY TANK
12
. . . . . . . . . . . .
DRAINING SOLUTION TANK
12
. . . . . . . . . . . . .
BATTERY CHARGING
12
. . . . . . . . . . . . . . . . . . . . . .
MACHINE MAINTENANCE
13
. . . . . . . . . . . . . . . . . .
DAILY MAINTENANCE
(EVERY 4 HOURS OF OPERATION)
13
. . . . . .
WEEKLY MAINTENANCE
(EVERY 20 HOURS OF OPERATION)
13
. . . . .
MONTHLY MAINTENANCE
(EVERY 80 HOURS OF OPERATION)
14
. . . . .
QUARTERLY MAINTENANCE
(EVERY 250 HOURS OF OPERATION)
14
. . . .
BATTERY MAINTENANCE
14
. . . . . . . . . . . . . . .
TRANSPORTING MACHINE
15
. . . . . . . . . . . . . . . . .
STORING MACHINE
15
. . . . . . . . . . . . . . . . . . . . . . . .
RECOMMENDED STOCK ITEMS
15
. . . . . . . . . . . . .
TROUBLE SHOOTING
16
. . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS
17
. . . . . . . . . . . . . . . . . . . . . . . . . .
TENNANT N.V.
model: 5100 nr.: 611363, 611364
EC DECLARATION OF CONFORMITY FOR MACHINERY
(Directive 89//392/EEC,Annex II, sub A)
– is in conformity with the provisions of the Machinery Directive ( Directive 89/392/EEC),
as amended, and with national implementing legislation;
– is in conformity with the provisions of the following other EEC directives:
– the following ( parts/clauses of) harmonized standards have been applied:
EN 292–1, EN 292–2, EN 294, EN 349, EN 563, EN 60204–1, EN 60335–1 ...
– the following (parts/clauses of) national technical standards and specifications have been used: NA
EN
Address:
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden–The Netherlands
Uden/Netherlands, 03–02–98
Stephan Martens – Technical Support Engineer
