Tennant 5700EE Скачать руководство пользователя страница 67

Страница: 67 / 82

MAINTENANCE

5700EE 331535 (9--06)

5. If the deflection is not the same over the full

length of the blade, turn the squeegee

leveling knob counter-clockwise to increase

the deflection at the ends of the squeegee.

Turn the squeegee leveling knob clockwise

to decrease the deflection at the ends of the

squeegee blade.

6. Drive the machine forward again with the

squeegee down to check the squeegee

blade deflection.

7. Readjust the squeegee blade deflection if

necessary.

ADJUSTING SQUEEGEE BLADE DEFLECTION

Deflection is the amount of curl the squeegee

blade has when the machine moves forward with

the squeegee lowered to the floor. The best

deflection is when the squeegee wipes the floor

just dry with a minimum amount of deflection.

1. Turn the machine power on.

2. Lower the squeegee.

3. Drive the machine forward, and look at the

deflection of the squeegee blade. The

correct amount of deflection is 12 mm

(0.50 in) for scrubbing smooth floors and

15 mm (0.62 in) for rough floors.

4. Turn the machine power off.

5. To adjust the amount of deflection, turn the

squeegee deflection cams counter-clockwise

to decrease the blade deflection.

Turn the squeegee deflection cams

clockwise to increase blade deflection.

6. Drive the machine forward again to check

the squeegee blade deflection.

7. Readjust the squeegee blade deflection if

necessary.

03719

12 mm

(0.50 in)

Содержание 5700EE



















































































Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды

Tennant 5700EE, Руководство оператора

Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды