Tennant 5700EE Скачать руководство пользователя страница 52

Страница: 52 / 82

MAINTENANCE

5700EE 3315353 (9--06)

SCRUB HEAD

The machine can be equipped with either a disk

brush, or cylindrical brush scrub head. Both scrub

heads contain skirts to control over-spray from the

scrub brushes.

DISK BRUSH SCRUB HEAD SKIRT

Make sure the scrub head skirt touches the floor

all the way around when the scrub head is

lowered. Check the skirt for damage or wear daily.

ADJUSTING THE SCRUB HEAD SKIRT

1. Lower the scrub head on a level floor.

2. Turn the machine power off.

FOR SAFETY: Before leaving or

servicing machine, stop on level

surface, and turn off machine.

3. Check to see if the scrub head skirt touches

the floor all the way around the scrub head.

4. If the skirt needs to be adjusted, pull the

strap end away from the skirt. Loosen the

strap from the buckle, and move the skirt up

or down to touch the floor.

NOTE: Replace the scrub head skirt when it is

damaged or no longer is able to touch the floor.

5. Pull the strap tight through the buckle, and

attach the strap end to the skirt using the

hook and loop fastener.

6. Raise the scrub head.

Содержание 5700EE



















































































Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды

Tennant 5700EE, Руководство оператора

Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды