Tennant 5700EE Скачать руководство пользователя страница 2

Страница: 2 / 82

This manual is furnished with each new model. It provides necessary operation and maintenance instructions.

Read this manual completely and understand the machine before operating or servicing it.

This machine will provide excellent service. However, the best results will be obtained at minimum costs if:

The machine is operated with reasonable care.

The machine is maintained regularly - per the machine maintenance instructions provided.

The machine is maintained with manufacturer supplied or equivalent parts.

PROTECT THE ENVIRONMENT

Please dispose of packaging materials,

old machine components such as

batteries, hazardous fluids such as

antifreeze and oil, in an environmentally

safe way according to local waste

disposal regulations.
Always remember to recycle.

MACHINE DATA

Please fill out at time of installation for future reference.

Model No. --

Serial No. --

Machine Options --

Sales Rep. --

Sales Rep. phone no. --

Customer Number --

Installation Date --

Tennant Company

PO Box 1452
Minneapolis, MN 55440
Phone: (800) 553--8033 or (763) 513--2850
www.tennantco.com

FaST--PAK is a US registered and unregistered trademark of Tennant Company.

Specifications and parts are subject to change without notice.

1998--2000, 2002--2006 TENNANT, Printed in U.S.A.

Содержание 5700EE



















































































Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды

Tennant 5700EE, Руководство оператора

Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды