Tennant 5700EE Скачать руководство пользователя страница 64

Страница: 64 / 82

MAINTENANCE

5700EE 3315353 (9--06)

ES option: The ES filter should be cleaned daily.

NOTE:

Do not

use steam to clean the tank.

A vacuum fan filter is located in the recovery tank.

Remove and clean this filter daily. Clean by

shaking dust or rinsing pleats with low pressure

water.

NOTE: Be sure the vacuum filter is dry before

reinstalling it in the machine.

SOLUTION TANK

The solution tank stores the cleaning solution.

The solution tank does not require regular

maintenance. If deposits form on the bottom of

the tank, rinse the tank with a strong blast of

warm water. The tank can be flushed through the

fill opening and top access hole.

ES option: The solution tank should be drained

and cleaned daily.

The solution tank contains one standard solution

line filter, and one solution line filter for the power

wand option. If the filters become dirty, the

solution flow will be reduced. Check and clean

these filters if necessary.

NOTE:

Do not

use steam to clean the tank.

Содержание 5700EE



















































































Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды

Tennant 5700EE, Руководство оператора

Результаты поиска

Содержание 5700EE

Отзывы:

Похожие инструкции для 5700EE

Бренды по названию

Популярные бренды