Tennant 355E страница 27 Скачать руководство пользователя | Manualshive

Страница: 27 / 72

background image

OPERATION

25

355E MM306 (12–92)

OPERATOR SEAT

The operator seat has three adjustments. The
adjustments are for the operator’s weight,
backrest angle, and the front-to-rear seat position.

NOTE: The operator seat contains a safety
switch. The operator has to be in the operator
seat to start the machine. If the switch is
deactivated while the machine is propelling, power
is interrupted. The directional pedal has to be
cycled through neutral before turning on machine
power.

The operator’s weight adjustment is controlled
with the weight adjustment lever. The lever has
three positions; light-weight, middle-weight, and
heavy-weight.

Adjust: Pull the lever up for the light-weight
position, move the lever to the middle position for
middle-weight, and push the lever down for the
heavy-weight position.

The backrest angle is adjusted using the angle
knob.

Adjust: Turn the angle knob clockwise to
decrease the angle of the backrest. Turn the knob
counter-clockwise to increase the angle of the
backrest.

The seat front-to-rear position is adjusted by the
seat position lever.

Adjust: Pull the lever out, slide the seat backward
or forward to the desired position and release the
lever.

07795

07796

07797

«
...
25
26
27
28
29
...
»

Содержание 355E









































































Отзывы:

Нет отзывов

Похожие инструкции для 355E

Бренд: UnionSpecial Страницы: 32

Бренд: Tornado Страницы: 14

LAVINA ELITE 3213EHV

Бренд: Superabrasive Страницы: 42

Бренд: Adler Страницы: 5

Бренд: R+M Suttner Страницы: 4

Бренд: Singer Страницы: 61

Бренд: Baby Lock Страницы: 84

Бренд: Janome Страницы: 86

Бренд: Janome Страницы: 49

Бренд: Radio Shack Страницы: 28

AquaRide 56314009

Бренд: Nilfisk-Advance Страницы: 32

Бренд: ELNA Страницы: 31

Бренд: Mi-T-M Страницы: 20

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 106

Бренд: Panasonic Страницы: 153

Бренд: Panasonic Страницы: 158

UF-780 - Panafax B/W Laser

Бренд: Panasonic Страницы: 158

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды