Tennant 355E страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 72

background image

OPERATION

355E MM306 (12–92)

30

Crinkle Wire 8-double Row Main Brush – The
stiff wire bristles cut through compacted grime,
hard to sweep dirt, and dirt mixed with oil, grease,
or mud. This brush is recommended for foundry
sweeping where heat may melt synthetic bristles.
The brush has good hopper loading ability, but is
not recommended for dusty applications.

Nylon 24-row Main Brush – Recommended for
severe dust conditions on rough surfaces. This
brush has excellent pickup and long life.

Fiber and Wire 24-row Main Brush – Offers
good sweeping action and pickup in heavy dust
concentrations. This brush is recommended
where soilage is slightly encrusted. The brush is
not recommended for heavy buildup or hard
packed soilage.

Polypropylene Side Brush – A good general
purpose brush for sweeping of light to medium
debris in both indoor and outdoor applications.
This brush is recommended when bristles may
get wet.

Nylon Side Brush – A longer life, general
purpose brush that is recommended for rough
surfaces.

Flat Wire Side Brush – Recommended for
outside and curbside sweeping where soilage is
heavy or compacted. The stiff wire bristles dig out
soilage. This brush is also recommended for
foundry sweeping where heat may melt synthetic
bristles.

SWEEPING

1. Make sure the hopper door light is off. If the

hopper door light is on, open the hopper
door.

08046

07763

«
...
30
31
32
33
34
...
»

Содержание 355E









































































Отзывы:

Нет отзывов

Похожие инструкции для 355E

Бренд: WARRIOR Страницы: 45

Бренд: Janome Страницы: 5

Бренд: Lindhaus Страницы: 25

Memory Craft 6300P

Бренд: Janome Страницы: 69

Бренд: Kärcher Страницы: 44

Бренд: Janome Страницы: 22

Бренд: Kärcher Страницы: 26

Бренд: W6 Страницы: 48

Бренд: Singer Страницы: 15

Ninja warrior 1200PSI NWCU1312N

Бренд: Prochem Страницы: 44

Бренд: Duerkopp Adler Страницы: 84

Бренд: Renkforce Страницы: 52

ellegante 2 BLG2

Бренд: Baby Lock Страницы: 8

Бренд: Brother Страницы: 204

Бренд: JUKI Страницы: 4

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды