2
Please read these instructions carefully before use and retain for future reference.
•
Please operate according to this manual, otherwise the protection provided by the
device will be impaired or fail.
•
Check the test leads, probe and case insulation condition before using. If you find
any breakage, damage or abnormality, or you consider the device is broken, stop
using the device immediately.
•
When using the test probes, keep your fingers behind the finger protection rings.
•
Ensure all inputs are less than the range selected otherwise it may cause electrical
shock or meter damage.
•
Do not apply voltage to the meter.
•
Disconnect circuit power and discharge all high-voltage capacitors before testing
resistance, continuity, capacitance or diodes.
•
Do not use the meter with the back cover removed.
•
Do not adjust the range selector during measurement.
•
Replace the batteries as soon as the low battery indicator appears on the display.
•
Remove dead batteries from the meter or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
•
Before replacing the battery, turn off the meter and disconnect all the test probes.
•
To prolong battery life turn off the meter after use..
ELECTRICAL SYMBOLS GUIDE
WHAT’S INCLUDED
•
Digital Multimeter
•
1 pair of test leads with clips.
•
9V battery (not installed).
IMPORTANT SAFETY INFORMATION
OVERVIEW
Low battery
Grounding
Continuity
Double insulated
Diode
Capacitance
Lx
Inductance
Fuse
Warning
Function Buttons
The following table provides information regarding the functional button operation.
Button
Description
Power
Press once to turn the meter on / press again to turn the meter off
L-C
(72-8155)
Press DOWN to enter capacitance measurement.
Press UP to enter inductance measurement.
Zero cap
(72-8150)
Press to adjust small capacitance to zero.