45
Press
STORE
once, STO and "no.xxxx" appears to
confirm the operation and the left secondary display
shows the current measurement reading. Press to
toggle between clearing the stored readings and start
from the first readings or start from the last stored
reading. Right secondary display shows the original
number of records.
Press
STORE
the second time, STO appears. The
left secondary display shows the storing time interval
in second, it is preset to zero. To change the interval
l
l
l
l
l
l
in second by pressing
+
or
-
button. The interval can
be as high as 255 seconds or as low as 0 second.
Press and hold
STORE
to access the quick setting.
Press
STORE
the third time, STO and no appears.
The left secondary display shows the index number
increase one. The right secondary display shows
the value of the corresponding index number, the
primary display shows the current measurement
reading.
If there is not set time to store the reading, each
press of
STORE
to store one reading. An index
number increase one.
The maximum number of stored reading is 100 and
9999 (for 72-7732A) When the stored readings
memory is full, the Meter will stop storing data.
To exit, press
EXIT
.
Automatic power off feature is disabled while the
meter is in this mode.
Chapter 4
Using Store, Recall & Send Features
Introduction
Chapter 4 shows you how to use store, recall and
communication features available on the Meter.
Storing and Clearing Readings
To store readings, proceed as follows:
Model 72-7730A/72-7732A: OPERATING MANUAL
Содержание 72-7730A
Страница 1: ...72 7732A 72 7730A...