Snazzi Sun Hood and Rain Shield Instructions
Page 3 of 6
August 2013
Fig. 7
Next lift up the back cover of the sun hood
(see Fig 7, left), and fold it over the back of
the pushchair backrest.
Fig 8: The back of the hood cover fitted over
the pushchair backrest.
Fig. 8
Fig. 9
Finally pull the front of the hood down to the
desired position (it may be helpful to hold the
rear bar in place). Once set at the desired
angle, tighten the 2 thumb screws. Each time
you wish to change the angle of the hood,
you must first loosen the thumb screws,
adjust the angle as desired and then ensure
that you tighten the screws to prevent them
falling off.
