Snazzi Sun Hood and Rain Shield Instructions
Page 4 of 6
August 2013
To remove the sun hood, undo the top
popper of the pushchair backrest cover as
shown (see fig 10, right).
Fig. 10
Fig. 11
Then press in the locking clip and push up as
shown (see Fig 11, left), this will release the
sun hood from the frame. Do this for both
sides then remove and fold the hood.
Fitting the rain shield:
With the sun hood in place and in the open
position, place the rain shield over the top of
the pushchair with the face flap to the front
(the face flap has a single retangular piece of
Hook & loop in the middle, as circled- see
Fig 12).
Pull the front of the cover down so that the
elastic goes over the footrest as shown.
Fig. 12
