Snazzi Sun Hood and Rain Shield Instructions
Page 6 of 6
August 2013
Important:
•
When entering any building, ensure that you undo the Hook & loop flap at the
front of the rain shield and fold it up so that the occupant of the pushchair
does not over heat. If it is warm inside the building we would recommend
removing the rain shield completely. Similarly if it is a hot day we would
recommend that you leave this flap open if you have to use the rain shield to
prevent overheating.
•
We do not recommend that you ever leave your child unattended when using
the pushchair. Special care should be taken when the sun hood and
transparent rain shield are fitted to ensure the hood or rain shield are not too
close to your child’s face.
•
When using the sun hood to protect your child from sunlight, we would
recommend that this is used in conjunction with sun cream and appropriate
clothing.
•
Always ensure that your sun hood and rain shield are dry before you fold
them for storage. Do not put either of these items near a heat source, such as
fires, radiators and hairdryers as this will damage the material. Also, make
sure you do not store the rain shield in direct sunlight as the heat may melt
the adhesive. Both items can be wiped clean using a damp cloth.
•
The sun hood and rain shield must be removed when folding the pushchair.
•
The sun hood and rain shield must be removed when using the pushchair as
a seat in a motor vehicle.
•
The standard sun hood is made of showerproof black fabric. To protect the
occupant from rain you must use the transparent rain shield in conjunction
with the sun hood.
•
If you remove the screws from the hood for any reason please ensure that
you screw them back on to the hood through the hole in the fabric. Do not try
to stretch the hole over the screw as you may damage the material.
•
Always check that the thumb screws are tight to prevent them from falling off.
