Tendercare Snappi Seat Скачать руководство пользователя страница 51

Страница: 51 / 54

Snappi Seat Standalone User Manual

Document No: 053-07 v5

Page 51 of 54

January 2019

Snappi Seat Standalone User Manual.doc

7. Cleaning

7.1 Seat Frame

1. To clean the seat frame, wipe with a damp cloth and dry thoroughly.
2. For more stubborn stains wipe with a damp cloth and warm water in which a little

mild soap has been dissolved. Dry thoroughly.

3. Never use furniture polish or any spirit to clean the framework.

7.2 Seat Cover

1. Remove the cover from the seat as detailed in section 5.2. To wash, use a 30°C

Synthetic Wash cycle.

2. Dry the cover thoroughly before re-assembly.

Do not tumble dry

or dry clean.

7.3 Pelvic strap & harnessing

1. Remove the pelvic strap or harness from the seat.
2. Wipe with a damp cloth and dry very thoroughly.

Do not tumble dry.

Do not immerse in water or wash in a machine.

Содержание Snappi Seat























































Результаты поиска

Содержание Snappi Seat

Отзывы:

Похожие инструкции для Snappi Seat

Бренды по названию

Популярные бренды

Tendercare Snappi Seat, Руководство пользователя

Результаты поиска

Содержание Snappi Seat

Отзывы:

Похожие инструкции для Snappi Seat

Бренды по названию

Популярные бренды