To update the firmware:
1. Download the firmware file from
www.tentechnology.com
and save it on your hard disk.
2. Click the Bluetooth icon in the menu bar and select
Send File
.
3. Browse and select the firmware file that you just downloaded.
4. Click
Send
.
5. Click the
Search
button on the your computer to find the naviPlay device.
6. Select the naviPlay device after it has been discovered and displayed in the list. If you are
updating firmware for the naviPlay remote, you will see the name
naviPlayRemote
in the list
of devices. If you are updating firmware for the naviPlay iPod adapter, you will see the name
naviPlayAdapter
.
7. Click
Send
.
Firmware Update Tips (W Mac)
When the firmware update has started, the status light double-blinks green slowly. After the
firmware update is complete, the status light glows green continuously for five seconds. This
indicates a successful firmware update.
If the firmware update fails the status light glows red continuously for five seconds, and then the
adapter switches off. If the adapter is then switched on, it goes into firmware update mode
automatically (you will see amber light double blinks), until the firmware update is successfully
completed.
Important!
When the firmware upload process begins, the old firmware is first erased on the
device. If the upload fails, the device will not operate until new firmware is uploaded
successfully.
23
Updating naviPlay Firmware
