Step 3: Attach Headphones to naviPlay Remote
Connect your headphones to the headphone jack on the naviPlay remote. You can also attach
the remote to powered speakers or stereo receivers. See “Using naviPlay with Other Bluetooth
Devices” for details.
Step 4: Turn on naviPlay Adapter and Remote
Press and hold the POWER button on the naviPlay remote for 1 second to turn it on. Make sure
your iPod is on. Turn on the naviPlay adapter by pressing the POWER button.
You should hear the naviPlay startup tones.
Both the naviPlay remote and the adapter status lights should blink green and amber at first,
then blink just green once the wireless connection between them has been established.
To preserve the battery charge, turn off the naviPlay devices when not in use. Press and hold
down the POWER button until the status light is constant amber, then release. The adapter also
turns itself off when it has been removed from the iPod after three minutes.
Step 5: Listen to Your Music
Select the audio track on your iPod and press PLAY/PAUSE on the iPod or naviPlay remote.
Adjust the volume using the naviPlay remote.
Quick Start
12
