2. Put the headphones in discoverable mode. (Refer to the documentation that came with your
headphones for details.)
3. Place the headphones near the naviPlay adapter. Make sure that no other nearby Bluetooth-
enabled headphones are turned on and in discoverable mode.
4. Press the POWER button on the naviPlay adapter and hold it down for at least eight seconds,
or until the status light alternates between quickly blinking amber and green. This initiates the
pairing process on the naviPlay adapter.
The naviPlay adapter will search for all Bluetooth-enabled devices nearby. The naviPlay remote
configures itself to connect to the nearest headphones it discovers. When the connection is
complete, the status light blinks green slowly.
If the connection process fails, the status light glows red continuously for five seconds. The
naviPlay adapter will continue to connect to the previously configured headphones.
Using the naviPlay Remote With Other Bluetooth-Enabled Devices
The naviPlay adapter and remote are automatically configured to connect to each other.
However, you can connect the naviPlay remote to any Bluetooth-enabled music device (such as
a PC, PDA, MP3 player, or mobile phone) that supports the Advanced Audio Distribution Profile
(A2DP). Although you can use the naviPlay remote with other Bluetooth music devices, you will
get the best performance when using it with the naviPlay adapter.
To use the naviPlay remote with different Bluetooth music devices:
1. Turn off the naviPlay remote.
Using naviPlay Headset with Other Bluetooth-Enabled Devices
20
