Ten-Haaft samy solar plus, Руководство по эксплуатации

Страница: 73 / 128

73
E
Confi guring DiseqC
A requirement for successful confi guration is that channels of the desired receivable
satellites are already stored in your receiver. If this is not the case, you will need to
store the channels fi rst. To do this, search for the relevant satellite with your SamY-
Solar+® by selecting the relevant search satellite and using the automatic search.
Once the satellite has been found, start the channel scan function on your satellite
receiver. Please refer to the manual of your receiver for further information. Next,
you need to assign a so-called DiseqC position to this satellite in your receiver. For
this procedure, please also refer to the manual of your receiver.
Example: The user wishes to be able to select two satellites via the DiseqC
system. The fi rst satellite is to be Astra 1, the second Eutelsat-Hotbird. If the
channels of these two satellites are not stored in your receiver, a channel scan
must be performed after the antenna has automatically moved into the posi-
tions of the respective satellites.
After having stored the channels of the satellites in the receiver, each satellite
is assigned a position.
In the settings menu of most standard receivers, this would appear as follows:
Satellite 1 ASTRA1 DiseqC: A
Satellite 2 HOTBIRD DiseqC: B
After storing the positions, exit the settings menu of the receiver and select
a stored channel.
Next, verify the correct function of your system
In the Sa® control panel, select option „DiseqC On/Off“ and use key
DiseqC: ON