Ten-Haaft Oyster V Vision, Руководство оператора, Страница: 7 / 32

7
2. CONTROL ELEMENTS
Vision
On / Off - System starts the search from
the last position
There are two ways of switching the Vision antenna system on and off:
With the button on the control device or by switching the receiver on and off. If you want the system
to respond when switching the receiver on or off, then the menu item "Receiver control" must be enabled.
See chapter 3.2 "Receiver control", page 16.
After switching on the system, the antenna unfolds and returns to the last position in which a satellite was
received. If the vehicle position has changed since, the system will not receive any signals and the automatic
search is started.
To switch the system off, press button again to retract the system and send it into rest mode.
If you would like to stop the movement of the antenna while it is opening or retracting, simply press to
instantly stop the antenna.
Notes:
Do not forget to switch off your TV set and the receiver, if applicable.
If the message "Manual search" is displayed after the antenna has opened, and if the system does not
commence the search automatically, then the system was being operated in manual mode when it was
last switched off.