Ten-Haaft Oyster V Vision, Руководство оператора, Страница: 28 / 32

28
BLUE LED
Once the data have been uploaded into the internal update memory, they can be distributed to the hardware
components connected to the FeatureBox.
This may happen automatically. However, it is often not possible to update all components at once because the
FeatureBox cannot know which state a component is in (e.g. because the antenna is not connected when the
update is performed).
This condition is neither unusual nor critical!
The LED illuminating blue shall make the user aware that an update can now be started by pressing the „i“ button.
UPDATE SEQUENCE
The components connected to the FeatureBox are updated in a fixed sequence: At first the FeatureBox is up-
dated, then the motor controller of the antenna, and then the control panel.
For safety reasons, the motor controller is only updated after it has been reliably identified and when the antenna
is folded in. This is why the antenna may retract if you press the „I“ button while the LED illuminates blue.
5. SERVICE